PIC Unboxing and How to use.

Search on App Store & Download.

Connect to PIC.

  • How to connect PIC with the PIC App
    1. Download the PIC App on your phone.
    2. Follow the instruction through the PIC App.
  • The PIC App can't detect my PIC.
    What should I do?
    If you can't find your PIC from the “Connect to PIC” screen, you can try the following steps:

    - Make sure that your PIC is powered on and within 10 meters of your phone.

    - Power OFF and ON Bluetooth on the phone.

    - Turn on 'Location' service on the Settings.

    - Check that PIC is not connected to another phone.

    - Do hard reset: Hold down button over 10 seconds.

    - Remove and reinstall the PIC App.

  • How to update PIC Firmware wirelessly with the PIC App
    1. Charge the PIC more than 30 minutes until the battery level exceeds 50%.
         * Please Keep the USB charger being connected until the upgrade is finished.
    2. Run the App and connect to the PIC.
         * Occasionally on certain chargers, it may be detected that the PIC is connected to the PC.
            In this case, try to change the charger with another one.
         * Or, while connected to the USB charger, turn on the PIC first, then launch the app.
    3. Go to Menu >> Firmware.
    4. Update your PIC with the latest firmware version.
    (Your PIC must be charging during firmware updating.)
  • PIC is not working.
    1. Check that PIC is fully charged.
    2. PIC must be turned ON.
    3. Do hard reset: Hold down button over 10 seconds.
    4. If the Top LED starts flashing as soon as turn on the PIC, it means that the PIC has been formatted with wrong file format such as MacOSX. You can recover it as:

    - Runs the App, connect to the PIC

    - Press Top-Left button to open menu

    - Storage -> Delete All

    - Terminate the App, power off the PIC

  • How to turn ON PIC / PIC is not Power ON.
    1. Push and hold the button 2 seconds to power ON.
    2. Charge PIC at least 30 minutes if no responding. (Check LED light is blinking.)
    3. Hold the button 10 seconds if LED light is not blinking.
  • Beeping sound is too low.
    1. It is the maximum sound we can have at this moment.
    2. Next generation PIC will have louder sounds.
  • How long does it take for full charging?
    1. It will take 110 minutes when PIC power is OFF.
    2. It will take 7 hours when PIC power is ON.
    3. Please, turn OFF PIC for faster charging.
  • PIC is not working after getting wet.
    1. PIC is satisfied with IPX6.
    2. Please, contact PIC Customer Support.
  • How to turn OFF PIC?
    1. Push and hold the button 2 seconds to power OFF.
  • How to change PIC’s name in PIC App
    1. Go to the PIC App, and Menu >> Edit
  • What kind of charger can I use for my PIC?
    1. You can use your smartphone charger.
    2. Charging adapter is over 5V & 1A.
    3. High-speed charger can be used, but PIC will be charged with normal speed.
  • PIC was not charged after spending hours and hours.
    1. Check on charging adapter that is over 5V & 1A.
    2. Use the USB cable provided in PIC package.
    3. PIC's bottom LED light is blinking during charging.

    If not, then let’s do hard reset.

    To do it, just hold down the button 10 seconds.

    4. Charge PIC fully until the bottom LED light is statically ON.

    It will charge much faster if you turn OFF PIC.

  • How to do hard reset (Re-booting)?
    1. Hold down the button 10 seconds.
    2. PIC LED light on bottom will be OFF and ON.
  • What are the requirements for downloading and installing the PIC App on my phone?
    The PIC App runs on phones and tablets that meet the following requirements:


    Android® 4.3 or above

    Bluetooth® 4.0 (BLE) and Wi-Fi Direct®


    iPhone® 4s and above *Under iPhone® 4 and iPad® 2 are not supported.*

    iOS 9.2 or above

    Bluetooth® 4.0 (BLE)

  • Why do we need to connect Wi‍-Fi every time we use PIC with iPhone?
    Because iOS has a limitation on that matter.
  • How long does it take for charging PIC?
    1. When PIC Power is OFF, it takes 30 minutes for 50% charging, and 2 hours for full charging.
    2. It takes longer charging time when PIC Power is ON.
  • How do I change the battery?
    Your PIC comes with a built-in and non-removable battery.
  • Can I connect my PIC to multiple phones at the same time?
    No, you cannot connect your PIC to two phones at the same time. You must disconnect it from one phone before you can connect PIC to another device.
  • How much storage do I have on PIC?
    PIC comes with a 16GB built-in memory.

    *Actual PIC storage is 14.5 ~ 14.9GB.

  • PIC Date & Time on image and video is not correct.
    Your PIC Date & Time needs to get synchronized with PIC App once.
  • Can we apply BitLocker,
    full disk encryption to PIC?
    PIC does not support BitLocker, full disk encryption. PIC will stop working if you apply BitLocker. Please, do not apply BitLocker on the PIC.
  • PIC storage is still full after deleting files in my PC or Mac.
    You must empty files in Recycle Bin or Trash Can.
  • What kind of file format does PIC support?
    PIC only supports FAT32. Please, do not format with others than FAT32.
  • Does PIC support 5GHz Wi‍-Fi?
    Yes, your PIC uses the 802.11 a/b/g/n Wi‍-Fi network standard that supports both 2.4GHz and 5GHz wireless frequencies.
  • My PIC emits a continuous beeping sound.
    What does this mean?
    PIC beeps continuously when the battery needs charging, or memory is full.
  • If my phone is already connected to a Bluetooth device,
    can I still connect it to my PIC?
    Yes, most phones and tablets support concurrent access to multiple Bluetooth devices.
  • Why do I need to manually connect my PIC to my Wi‍-Fi network every time I use the PIC App for iOS?
    It is a restriction of the iOS platform. It does not allow apps to switch the Wi‍-Fi automatically, so you need to manually connect PIC to your Wi‍-Fi network.
  • How do I know if I have framed my photo or video correctly?
    Your PIC has a 135-degree wide angle camera lens. Simply point your PIC at your subject to capture it.
  • My PIC doesn't respond when I press the button.
    How do I fix this?
    1. Try to press the button again and check if the LED light turns ON. If so, it's working properly.
    2. Charge PIC fully if LED light does not turn ON
  • Why do I get a lot of blank photos captured on PIC?
    1. You can avoid accidental presses of the button by adjusting how you store your PIC so that button won't be pressed against other objects.
  • Why is the Internet connection intermittent while my PIC is connected to my phone?
    1. PIC is connected to your phone or tablet through a Wi‍-Fi® connection. That is why the Internet connection may be interrupted on your device while PIC is connected to your phone.
    2. If you have mobile data enabled on your phone or tablet, your Internet connection will continue through the use of your mobile network.
  • Why doesn't the live viewfinder rotate when I turn my PIC sideways?
    The live viewfinder is always in a landscape orientation. Photos captured in portrait orientation will automatically rotate after you download it to your phone or tablet.
  • How can I prevent an unauthorized device from connecting to my PIC?
    Be sure to set a strong password, because a device can only connect to your PIC when the correct password is entered.
  • When pairing my PIC and phone,
    how do I know which one is my PIC from the list of device?
    1. When the PIC App scans for available devices, it will list down the names and serial numbers of detected devices. Select the item from the list that matches the device name and SSID number of your PIC. Ex) PIC-XX : XX : XX
    2. You can change PIC name in PIC App once you pair your PIC and phone.
  • How do I disconnect between PIC and phone?
    1. Go to PIC App, and select Menu >> Disconnect PIC
  • Why is the live viewfinder on the PIC App sometimes choppy?
    1. The PIC App's live viewfinder uses RTSP streaming protocol, which highly depends on network and phone's capabilities.
    2. A crowded network environment, such as in an office or public area with many Wi‍-Fi hotspots, might interfere with the PIC App's connection, especially on 2.4GHz channel. You can try to reduce the interference by bringing your phone or tablet closer to your PIC.
    3. Our test results show a few phones have issues with RTSP playback. Please check with your phone or tablet manufacturer for support.
  • I cannot take a picture or video after power ON PIC.
    1. You cannot take a picture or video when you are in gallery mode.*Since PIC App Ver. 1.2.6, this limitation has been solved.
    2. Power OFF and ON PIC.
    3. If not working, hold the button 10 seconds for rebooting PIC.
  • I cannot take a picture or video after power ON PIC.
    Only hearing loud noise.
    Charge PIC at least 30 minutes. PIC does not have enough battery power.
  • I cannot take a video after PIC button twice.
    1. Push PIC button fast twice.
    2. Upgrade into latest Firmware. This has been improved with the latest firmware.
  • PIC makes “Be-li-lic” sounds when PIC turns ON,
    and cannot take any picture and video.
    1. PIC’s memory is full. Please, transfer images and videos to other storages such as PC and smart phone.
    2. Check PIC whether PIC is coded by BitLocker with clicking right mouse button when you connect PIC with PC. Remove BitLocker on Windows PC.
  • PIC cannot be detected by PC.
    PIC must be turned ON. PIC bottom LED light should be ON.
  • I forgot the password.
    Below procedure will reset all settings includes password. However, the photo, video and the Firmware version will be preserved.
    1. Turn off the PIC.
    2. Press the button five times in a row. You have to press it five times in 1 second intervals. It would be helpful to run a Stopwatch App next to you.
    3. When it done, the Top LED will blink and PIC makes some sound.
    Please checkout this video.